WeatherTech WaterBlade

The WaterBlade features a soft, 12" non-scratch silicone blade that is designed to safely remove water from almost any surface.

The hand held WaterBlade conforms to surface contours, which significantly helps reduce the time and effort it takes to remove liquids from surfaces.

Its ergonomic design makes it easy to hold and operate.

It also features tapered sides and a gentle silicone blade that won't scratch surfaces making it safe for all paint finishes, fiberglass, windows and more.

The WaterBlade is great for cars, trucks, vans, RV's, boats, house windows, shower doors and other surfaces around the home.

Dries your vehicle in one-third of the time

Patented T-Bar edge quickly whisks away water

Soft silicone blade will not scratch painted surfaces

Flexible blade molds to the shape of the surface

15 times less friction than terrycloth & microfiber towels

Hundreds of uses around home and shop

Made in USA

Thoroughly wash and rinse your vehicle before using this product, including any recessed areas, grooves and openings to wash away any foreign materials.

Make sure that any dirt or abrasive material has been removed; these materials can cause damage to the vehicle while using the WaterBlade.

The handle of the WaterBlade should never come in contact with the vehicle, it can potentially cause damage.

Only the blade should come in contact with the surface.

Begin drying with the WaterBlade before water has dried to prevent spotting.

The WaterBlade should not be used on a dry surface.

When using the WaterBlade, only moderate pressure is required to remove the water; the soft, silicone blade will mold to the shape of the car.

A small amount of additional pressure may be required for ridges, peaks or extreme contours.

Begin drying from the top down to minimize dripping water.

Finish drying process with a micro-fiber towel in grills, creases, etc.

Caring for the WaterBlade

Wash and rinse your WaterBlade before each use.

Silicone blade of the WaterBlade should be protected when not in use.

Be careful of sharp objects and edges so that surface of blade is not damaged.

WeatherTech Direct, LLC warrants that our products will be free from any defects in manufacturing, materials and workmanship for the life of the

original purchaser and only for the original vehicle they were installed in.

Exclusions to this warranty include wear due to severe abrasive conditions, chemical contamination, such as spilled gasoline, bleach, vehicle accidents, misuse, abuse, incorrect installation, incorrect use, etc.

FOR BEST RESULTS: Thorougly wash and rinse your vehicle before using this product, including any recessed areas, grooves and openings to wash away any foreign materials.

Make sure that any dirt or abrasive material has been removed; these materials can cause damage to the vehicle while using the WaterBlade.

The handle of the WaterBlade should never come in contact with the vehicle, it can potentially cause damage.

Only the blade should come in contact with the surface.

Begin drying with the WaterBlade before water has dried to prevent spotting.

Do not use WaterBlade on dry surface.

When using the WaterBlade only moderate pressure is required to remove the water; the soft, silicone blade will mold to the shape of the car.

A small amount of additional pressure may be required for ridges, peaks or extreme contours.

Begin drying from the top down to minimize dripping water.

Finish drying process with a microfiber towel in creases, grills, etc.

CARE: Wash and rinse your WaterBlade before each use.

Silicone blade of the WaterBlade should be protected when not in use.

Be careful of sharp objects and edges so that surface of blade is not damaged.

ADDITIONAL USES: The WaterBlade is also great for car windows, boats, RVs, house windows, shower doors, and other surfaces in the home.