For the most recent full-suspension models in the QuietKat RidgeRunner and Jeep lines, we offer a trailer axle that makes it easy to connect to one of our top-of-the-line cargo trailers.
Designed and produced in collaboration with the Robert Axle Project, this trailer axle is calibrated specifically to work with QuietKat full-suspension eBikes. It completely replaces the standard axle that comes with all QuietKat trailers, with the same secure connection and reliability that our stock axles provide.
This BOB trailer axle is simple to install. Unscrew the bobbin on the threaded side of the full-suspension axle. Then remove the standard axle on the brake side of your eBike and insert the BOB axle through the assembly. Tighten the threaded axle with a 5-millimeter hex wrench and re-attach the bobbin. Finally, load the QuietKat cargo trailer straight onto the bobbins on either side, lock the sides in place, and secure them with the attached safety pins. You’re all set.
The QuietKat BOB trailer axle works with all RidgeRunner eBikes from 2019 or later, as well as Jeep eBikes made in 2020-22.