Dometic FreshJet FJX3573MWHAS - 15,000 BTU RV Air Conditioner White - Direct Replacement for Dometic Brisk Air II
After a long, hot day outdoors, return to the cool comfort of your RV. The FreshJet RV air conditioner’s industry-leading design provides maximized cooling capacity and increased airflow while reducing noise. At 4 dB quieter than its predecessors, perceived noise is cut by one third. The custom blower system and advanced coil design optimize airflow and provide superior performance while bringing peace to your home on the road. Its expanded polypropylene (EPP) closed-cell bead foam provides weight savings, impact resistance, and acts as insulation. Evaporator coils have been e-coated for durability and 28% less refrigerant is used to promote sustainability. The custom composite base-pan and shroud reduce weight with a modern, stylish look. The FreshJet series is the direct replacement to Dometic's Brisk II series. Be sure to check out RV Part's Country HUGE selection of RV air conditioners and the interior parts to pair with it. We have the best prices and the fastest shipping times.
The FreshJet air conditioner will include a large six pin plug (umbilical cord) to connect to either a mechanical ceiling assembly or a thermostat control kit. This is considered “plug-n-play”. Current FreshJet models are cool only and will work with any Dometic wall thermostat as long as it is connect to corresponding control box (past, present, and future controls).
Important Notice:
Brisk II models are being discontinued by Dometic and being replaced with the FreshJet 3 series. FreshJet 3 series air conditioners install the same as the Brisk II. FreshJet air conditioners are the warranty replacements for Brisk II units.
What is included?
- Air Conditioner
- Roof Gasket (pre-attached)
What is not included?
- Interior Assembly
- Thermostat
- Instructions
Compatible Interior Parts:
ADB Ceiling Control Set-up:
Single Zone Thermostat Set-up:
Multi Zone Set-up:
Replacing a Coleman AC (non-ducted) and would like to keep Coleman ceiling assembly:
There is no heat strip option for FreshJet units. If you have a heat strip installed on your Brisk II model, it cannot carry over to your FreshJet installation.
- 15% Higher Airflow: Custom blower system provides maximum airflow for even circulation
- 13% More Cooling: Unique design delivers powerful performance and uniform temperature
- 4 Decibels Quieter: Produces 50% less perceived noise than its predecessors
- Modern Look: Sustainable design, requiring 28% less refrigerant than its predecessors
- Lightweight Construction: Lighter design reduces weight load and is easy to install
Additional Info
Rooftop Footprint Dimensions 29-5/8" x 27-5/8"
Height 13-13/16"
Cut-Out Requirements 14" x 14" Roof Opening
Nominal Capacity 15,000 BTU/hr
Power Consumption 4399W
Power Source 120V AC
Additional Electrical Requirements 12V DC (for the controls)
Minimum Generator Size 3.5 KW (1 Unit)
Installed Weight 66 lbs.