RV Rubber Roof Primer-Kool Seal-1 Gallon - Mfg # 34-700-1
Kool Seal's Camper Rubber Roof Primer, 1 Gallon, is a rubberized undercoating formulated with acrylic elastomeric resin, modified with synthetic rubber. It is designed to perform on E.P.D.M. rubber membrane. The rubber-like properties that allow expansion and contraction with the roof provide an excellent surface for application of Kool Seal® RV Rubber Roof Top Coat. This product is a primer and
MUST BE TOPCOATED. Kool Seal® RV Rubber Roof Primer is light blue in color and designed to improve the adhesion of Kool Seal® RV Rubber Roof Coatings on E.P.D.M. It also improves resistance to standing water.
Kool Seal RV Rubber Roof Primer Features:- Protects and extends the life of RV roofs.
- Improves topcoat adhesion.
- Durable under small, shallow ponded water areas.
- Soap and water cleanup - while wet.
Recommended uses:
- Rubber Roofs
- EPDM Rubber Roof Membrane
- Aluminum Asphalt Coating
CHARACTERISTICS:
- Color: Blue
- Vehicle Type: Acrylic
- Volume Solids: 40% ±2%
- Weight Solids: 49% ±2%
- VOC: 39g/l
- Drying Time: dry to touch in 4-6 hours @ 77°F, 50% RH: temperature and humidity dependent
- Recoat: 24 hours
- 2 coat application
- Coverage per gallon: Apply at 100 sq.ft. per gallon.
To Calculate How Much Needed Just Click On Link: Calculator
APPLICATION:
Apply with a soft brush (avoid excessive brushing), roller or airless spray. Allow Kool Seal® RV Rubber Roof Primer to dry 24 hours prior to applying any Kool Seal® Elastomeric topcoat. This product has excellent suspension and requires
minimal stirring. DO NOT THIN.
Airless Spray:
• Pressure: 3,300 psi
• Spray tip: Reversible, self-cleaning tip
without diffuser pin. Size .031" with a fan
angle of 60° (ex. 631).
• Hose Size: At 300’ total hose length,
use 250’ of ¾”- ½”
10’ swivel whip end 3/8" hose.
• General: The longer the hose, the
smaller the tip orifice size.
Brush/Roll:
• Soft brushes or a ¾” nap roller may be
used. May require multiple coats to
achieve proper coverage.
Once the surface has been properly prepared coat the entire roof with Kool Seal® RV Rubber Roof Primer. Do not apply the primer when the temperature is below 50° F or if the temperature is expected to drop below 50° F before the coating has completely dried.
NOTE: In areas where dew accumulates in the early evening it is best to stop coating by
3 P.M. to prevent wash off which will occur if dew, fog, or rain arrive before the coating dries. Allow 4 - 6 hours for coating to dry prior to being subjected to rain,
heavy dew or temperatures below 50° F.
Camer Rubber Roof Primer-Kool Seal -1 Gallon
