With LED Indicator: Yes
Charging Phase Voltage Charge per Cell:
Bulk Charge 2.46
Absorption Charge 2.36
Float Charge 2.26
Bulk Charge
The batteries are charged from the
full rated output of the DLS charger. During this stage, the batteries
are recharged quickly to reduce charge times.
Absorption Charge
The batteries are then held in
the absorption stage for a controlled period, insuring a full and
complete charge. During this stage, the battery cells are equalized to
14.2vdc for increased capacity.
Float Charge
During the float stage, the DLS
charge voltage is reduced to 13.6vdc. This minimizes gassing, while
maintaining a full charge. If the battery voltage drops below 12.6vdc,
the IQ4 will restart at the bulk charge stage and repeat this cycle.
Weekly Equalization
If the batteries have not
received a "smart charge" during a 7 day period, the IQ4 will switch the
DLS charger into a pre-programmed, equalization stage to top off the
batteries. This ensures full batteries all of the time without
over-charging. IQ4 Controllers feature an installation jack plug. Simply
plug the IQ4 Smart Controller into the Dual Voltage Jack on the top of
the DLS unit. The smart-charge circuitry is then automatically engaged.
| Frequency Compatibility: | 60 Hz |
| Capacity (Continuous/Peak): |
1000W/2000W |
| Outlets (Quantity/Type): |
4 x 5-15R |
| AC/DC Voltage: |
120/12V |
| Remote Control Capability: |
Yes, w/ optional APSRM4 |
