Changing Ball Height, Replacing Balls, and Stowing Away
adjust the height of the ball, remove the pin so that you are able to
slide the ball platform up or down along the shank to the desired
position. Re-insert the pin once you have found the correct height and
replace the clip.
Switching the hitch ball is just as easy.
Simply remove the pin holding the ball platform in place and slide the
platform off of the shank. Flip the platform upside down so that the
ball you want to use is on top. Then slide the ball platform back onto
the shank and replace the pin.
When you're not using the ball
mount, you can flip the ball platform around and stow it beneath your
hitch so that you won't bang your shins. Just remove the pin to slide
the ball platform off of the shank and flip it around so that the hitch
balls face towards your vehicle. Then slide the platform back onto the
shank and replace the pin.