Atwood GEH16-EXT Gas and Electric with Heat Exchanger XT 10 Gallon DSI Water Heater 94029
Atwood XT - The Intelligent Way to Deliver More Hot Water
Ever wish you could have more hot water but didn’t want a bigger, bulkier, heavier water heater? Provides the equivalent of 16 gallons of hot water in a 10 gallon size by
heating cold water to a hotter temperature and then mixing it with more
cold water through an already installed mixing valve on the rear.
result is 50% more hot water! Easily installed in the same cut-out
dimension of an existing Atwood 10 gallon water heater. Features
pre-installed winterizing by-pass kit.
Atwood XT comes pre-configured for installation with a winterizing
bypass capability. The Atwood XT can also be installed in the same
cut-out space as the current, popular Atwood Water Heater, saving the
expense of having to redesign coaches to accommodate for bigger,
bulkier, heavier water heaters.
Atwood XT pre-configured winterizing capability eliminates one
additional, time-consuming installation step. The valve, hose, tee, and
thermostatically-controlled mixing valve, with a check valve and a cold
water passage, allows you to isolate and drain the tank and pump
antifreeze through the plumbing circuit. Because Atwood has greatly
increased hot water output while maintaining the size and weight of the
water heater, one can simply install the Atwood XT in the same cut-out
dimension that they have grown accustomed!
Exothermal Technology has increased the hot water output of the Atwood
XT Water Heater, not the size of the water heater! While some
manufacturers are trying to provide additional hot water by creating
bigger, bulkier, heavier water heaters, Atwood provides a more efficient
Operates on LP gas or Electric 110V and/or Heat Exchanger with DSI electronic ignition.
Cutout dimensions: 15-3/4"H x 16-1/4"W x 21-3/4"D.