Includes Safety Cables: Yes
Ball-In-Socket Flex Joint
Tow bars are
notoriously difficult to connect and disconnect, especially on uneven
surfaces. Rigid tow bars have arms that are essentially locked in place
so you have to drive your towed vehicle into the exact position
necessary for hookup. But with the Aventa LX, you can connect from the
approximate towing position, even on unlevel ground. The unique
ball-in-socket joint allows the tow bar arms to swivel and pivot just
enough to compensate for a slight height difference. And because it's a
spherical joint as opposed to the traditional, bolt-together flex joint,
there will be less wear and tear on your tow bar over time.
convenient, self-centering arms help to make hookup a snap as well.
Once you have connected the tow bar to the base plates on your towed
vehicle, simply drive your RV forward until the tow bar arms fully
extend and lock in place.
Non-Binding Tow Bar
Ox has defeated the age-old problem of binding by creating a tow bar
that is just as easy to release as it is to hook up. Simply press down
the locking handles on the tow bar arms until the internal latch
disengages. By releasing some of the static pressure from your tow bar
you can flex its arms just enough to make disconnecting from the base
plates a snap, even when it's out of level with your RV.
Ox base plates on your vehicle are equipped with two tabs each that
connect to the brackets on the ends of the tow bar arms. These brackets
are referred to as "lugs." The unique triple-lug design of the Aventa LX
tow bar creates a tighter, more stable connection by surrounding both
base plate tabs. The result is a sturdy, reinforced connection that is
stronger and more rigid for a safer, more dependable towing experience.
up the Aventa LX to your base plates is as simple as it is secure. Just
insert the triple-lug end of the tow bar arm into the base plate so
that the center lug is positioned between the two tabs of the base
plate. Then insert the 1/2" keeper pin through the lugs and tabs and
secure it at the end with the included quick pin.
Aventa LX can be easily stored on your RV when it is not in use. After
disconnecting the tow bar from your towed vehicle, push the arms of the
tow bar together so that they are side by side. You can then fold them
up toward the RV and insert the integrated hold-up bolt into place on
the hitch connector. Then pivot the arms down so that they are held
firmly in place alongside the RV, parallel to its bumper.
43.5 x 6.2 x 6.2 inches
Item model number
Manufacturer Part Number